10-22-2018, 04:35 PM
The same code builds and run on a Raspberry Pi locally via HDMI Monitor, but does not display remotely using ssh. This might be due to the monitor being connected. Also, this did require installing 'libgles2-mesa-dev' on the Pi to work. Also, I am currently using a B+ which is quite slow. I'll have to try with a Pi 3 or Pi 3 B+ and see if the performance is better. The Beaglebone does perform better than the B+.
The other thing is that I am using a Beaglebone Blue headless since it does not have a HDMI out connection. i have been able to get an SDL example and QT to run remotely via ssh on the Beaglebone as well as 'glxgears' but no luck thus far with the gold book code. It does seem to run locally via a remote desktop connection.
The other thing is that I am using a Beaglebone Blue headless since it does not have a HDMI out connection. i have been able to get an SDL example and QT to run remotely via ssh on the Beaglebone as well as 'glxgears' but no luck thus far with the gold book code. It does seem to run locally via a remote desktop connection.