12-28-2020, 11:38 PM
(This post was last modified: 12-28-2020, 11:50 PM by jomoengineer.)
I finally got a 32Gb eMMC card for the C4 ( found they do not support boot from sd card on this board) and after messing up the loaded Mate OS, I installed the Ubuntu 20.04 5.7.0 Kernel image from the YouTube video. The image is quite minimal so I had to mess with it a bit to get what I needed install.
http://ppa.linuxfactory.or.kr/images/raw/arm64/focal/
I just used the one list in the video notes which is frm May 2020: ubuntu-20.04-server-odroidc4-20200501.img.xz.
One thing to note, the images from Hardkernel are running with 4.9 kernels so I had to get the one from linuxfactory site as the link shows to get a 5.x kernel when is required to load the Wayland driver. It will not load on the 4.9 kernel images.
I was able to install the mali-bifrost-wayland-driver and use the Wayland login for the Desktop to run a proper glmark2 test. It ran fine for a bit with some numbers in the 700++ FPS, but then crashed at the end with an overall glmark2 score of 400. I'm not sure what the issue is, but will send a note to the folks who manage the image.
Hopefully I can put this to good use now.
http://ppa.linuxfactory.or.kr/images/raw/arm64/focal/
I just used the one list in the video notes which is frm May 2020: ubuntu-20.04-server-odroidc4-20200501.img.xz.
One thing to note, the images from Hardkernel are running with 4.9 kernels so I had to get the one from linuxfactory site as the link shows to get a 5.x kernel when is required to load the Wayland driver. It will not load on the 4.9 kernel images.
I was able to install the mali-bifrost-wayland-driver and use the Wayland login for the Desktop to run a proper glmark2 test. It ran fine for a bit with some numbers in the 700++ FPS, but then crashed at the end with an overall glmark2 score of 400. I'm not sure what the issue is, but will send a note to the folks who manage the image.
Hopefully I can put this to good use now.